How to use smartmontools to monitor hard disk health?

Monitoring your hard disk health is a very important thing. You do not want to wake up one day, turn on your computer and suddenly your hard disk has crash and all your valuable data has gone with the wind. At that time crying would not get your data back. Like some people always say, prevention is better than cure. Apart from backing up your data regularly, monitoring the health of your hard disk is an essential task. It is to make sure any symptoms of bad sector or any failure can be detected earlier and steps to take care of it can be done sooner. One of the tool that can be used to do the job mentioned before is smartmontools. According to yum description, smartmontools are “Tools for monitoring SMART capable hard disks“.

To install smartmontools on fedora:
# yum install smartmontools

Make sure your hard disk is smart capable
# smartctl -i /dev/sda
smartctl version 5.37 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD800JD-60LSA5
Serial Number: WD-WMAM9MA75547
Firmware Version: 10.01E03
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 22 10:05:31 2008 MYT
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

Smart support is available for this hard disk and enabled

To monitor your hard disk health
# smartctl -H /dev/sda
smartctl version 5.37 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

To run test on your hard disk
# smartctl -t short /dev/sda

To see the selftest logs of smartctl
# smartctl -l selftest /dev/sda

See all options for smartctl
# smartctl -h

Manual for smartctl
# man smartctl

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s